You have arrived on the English website.

Accessories and spare parts

Everything is inspected, assembled and tested in our factory before shipment

Inspected, assembled and tested

In addition to its fabrications, Charlatte Réservoirs can expand its offer with the supply of accessories complementary to the operation of the tank, and the correct regulation of your water network.

An important point for the durability of our equipment: the knowledge of the water level, and the management of the pressure
Depending on the precision desired by the customer, it may be simply visual reading devices, or on the contrary, more sophisticated devices for remote reading, with management thresholds alert ...
For the convenience and safety, we can provide sets, ladders and platforms to reach the various access points and controls of the tank.

Our mechanical design office will integrate these materials to the tank plan, depending on the information you provide: distance ground, access, height, constraints .... Of course, on request, we have in stock the necessary spare parts.
Take the tank number indicated on the manufacturer's plate of the balloon, or on the technical documents transmitted with the tank.

Niveau de fabrication

Manufacturing level

Charlatte Réservoirs has always developed its own simplified level system : ball or isolation valve.

  • Notice niveau à bille (pdf, 119.55 KB)

Magnetic level

For a more precise visual reading, and possible remotely thanks to a 4/20 transmitter, mounting between flanges.

  • Niveau magnétique (pdf, 544.42 KB)
  • Magnetic level BM26 (pdf, 624.09 KB)

Differential pressure transmitter

In the technology era, analogue readings are increasingly common, allowing on-site and remote reading all over the world.

  • Fuji eau claire (pdf, 1.55 MB)
  • Fuji eaux usées (pdf, 1.61 MB)
  • Emerson eau claire (pdf, 333.64 KB)
  • Emerson eaux usées (pdf, 1.61 MB)
  • DPT Krohne potable water (pdf, 1.58 MB)
  • DPT Krohne waste water (pdf, 1.12 MB)


Depending on which tank model you have, you may need a compressor for pre-charging at the time of installation, or you may need to confirm the network pressure for the tank to work properly.

  • Fiche compresseur AQ344 (pdf, 28.54 KB)

Ladders and platforms

Ladders are made to measure and adjusted to your tank and to the constraints of your environment.

  • échelle
  • échelle et plateforme

  • Echelles et plateforme (pdf, 515.71 KB)


We can extend our tanks to reach your network connection (valve or pipes).

  • Fiche clapet (pdf, 272.02 KB)


Patented by CHARLATTE, they are made in material suitable for the fluid contained in the tank.
  • vessie 100 000L
  • montage vessie

Taps and various

Valves, pressure gauges, throttles, seal kits, etc., everything to ensure the tank works properly.

  • mano
  • raccord flexible


It is important to choose the right packaging for the means of transport for the material, to ensure it arrives safely at its destination: from the SEI3A crate to the SEI4A-B-C closed case, pallets, trays, cradles, etc., everything is made to measure.

Delivery packaging

5 pictures
For more information, please click here to contact us